Compact 2 Gas Fireplace
Model: RIBF2N
-
Rinnai Compact 2
The Rinnai Compact 2, a popular choice as the small fire solution. Designed with versatility in mind, this fire can fit where others can't. Sleek modern styling with easy installation.
Features
• Design your own look with a range of framing options
• Impressive 5 kW heat output, can heat up to 78 m²
• 2-speed convection fan
• Fits most existing fireplaces for easy renovation
• Manual controls for easy operation
Domestic heating appliance suitable for living rooms and open plan areas. Heating area 56-78 m² (depending on where you live in NZ).
Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.
General clearances
| Input: | 9-25 MJ/h |
| Output: | 1.6-5.0 kW |
| Efficiency: | 73% |
| Energy Star Rating: | 2.8 stars |
| Burners | Ember bed and flame burner |
| Combustion System | Naturally aspirated multi port burner |
| Data Plate | Inside the appliance on the front right hand side panel |
| Fan | Convection fan tangential 2-speed |
| Flue - Masonry |
Rinnai strongly recommends the use of a Rinnai flexiliner flue system. Failure to meet this criteria may result in an unsafe situation. Installation without a flexiliner flue is permissible as long as the chimney is checked for soundness and ability to achieve a good draw. If in doubt install a Rinnai flexiliner flue system. Rear discharge spigot 43 x 245 mm. |
| Flue - Decorative Chimney (installations into a combustible opening) |
Natural draft double skin flue. Termination—an approved 100 mm cowl must be fitted to all installations.
For new fireplace installations (installations into a combustible opening) a Rinnai zero clearance box and flue kit is a mandatory requirement to meet warranty conditions. |
| Gas Connection | ½ " BSPF male flare |
| Gas Control | Push button combination control valve |
| Ignition | Continuous spark electronic ignition |
| Noise Level | 49 dB(A) |
| Operation | Push button to light to pilot and burners (low, medium, and high) |
| Power Consumption | High 20 W, standby 0 W. The electrical connection can exit the appliance from the lower left or right hand side, or from the rear of the heater. |
| Safety Devices | Flame failure thermocouple, overheat switch, fan delay, and power failure protection. |
| Weight | 39 kg |
| Market Release | May 2012 |
| ES: Supplier Declaration of Compliance |
Declaration Number:1489820136 |
| Downloads | |
 |
Operation Guide |
|
Installation Guide |
