DLM FlashGuard Soft Edge Flashing LH 63mm Strip - FG63L

Model: FG63L

FLASHGUARD is a soft edged roof weatherseal flashing, for lock seaming to Zincalume®, galvanised or aluminium roof flashing sheets.
This unique product will expand and readily shape snugly to the contours of the roofing profile. FLASHGUARD is suitable for installation over pressed metal tiles and long run corrugated and trapezoidal roofing profiles, which do not exceed 32mm in height.

FLASHGUARD comprises an expandable aluminium coil strip with a special synthetic rubber compound, bonded to the underside. The aluminium strip has been etch primed to provide a good key for top coating. The black synthetic rubber provides a weather sealing membrane on the underside of the aluminium strip. It will not harden, shrink or melt within the service temperature range of between -40°C and +90°C and contains only 1% carbon black by weight. A layer of soft paper is applied to the underside of the rubber to prevent it sticking to the roll formers machinery and to provide protection when handling.
FLASHGUARD is available in 63mm width for both trapezoidal and corrugated profiles and 43mm width for corrugated profiles.  

DLM FlashGuard Soft Edge Flashing LH 63mm Strip - FG63L

• Hand: Left Hand
• Strip Width: 63mm
• Coil Length: 120meters

• Extremely malleable - FLASHGUARD is so easy to install, it can be dressed down using finger pressure only, so there is no need for special tools. There is no need for hammering into roof profile, no need for cutting or forcing into shape and hence no risk of scratching, denting or paint damage to the roof.
• Very quick to Install- Because of the ease of fitting FLASHGUARD, reduced installation time will result in major savings in labour costs.
• Increased safety - Without the need to carry, and wield other tools to install FLASHGUARD, occupational safety on the job is increased.
• Weatherproof &birdproof - The special rubber backing provides a weather sealing membrane with excellent stretch characteristics and resistance to moisture. FLASHGUARD perfectly hugs the contour of the roof profile, preventing birds from gaining access.
• Compatible - Compatible with Zincalume®, aluminium and galvanised steel roofing materials.
• Repairable - If damaged, it is easily repaired by adhering another layer underneath.
• Paintable - FLASHGUARD is etch primed, ready for top coats to be applied to colour match the roof

Colours Available:

• Grey Friars
• Iron Sand
• Karaka
• Sandstone Grey
• Zincalume
• Stone
• Mist Green
• Lichen
• New Denim Blue
• Lignite
• Storm Blue
• River Gum
• Permanent Green
• Pioneer Red
• Ebony
• Scoria
• Gull Grey  

Downloads
	DLM FlashGuard Soft Edge Flashing