INFINITY® HD250 External VR Model
Model: INFHD250HNC
Rinnai Infinity HD250 External VR Model
Temperature controlled continuous flow gas hot water system for external applications. Factory preset to 55 °C.
Hot water capacity
2.4 to 37 litres per minute.
Energy efficiency
80%
.jpg)
-billboard.jpg)
Energy cost saving references
1. The calculations are based on independent energy consumption data from AS 4232 and heat loss data derived from the BRANZ HEEP program. Comparative electric cylinder was 180 L in capacity.
2. 60% Saving is for the Rinnai INFINITY® gas water heater VT models running on Natural Gas. Rinnai Rinnai INFINITY® gas water heater VT models manufactured after July 2011.
3. 15% Saving is for the Rinnai INFINITY® gas water heater VT models running on LPG. Rinnai Rinnai INFINITY® gas water heater VT models manufactured after July 2011.
4. 66% Saving is for the Rinnai INFINITY® gas water heater EF250, EFi250, and EF24 models running on Natural Gas.
5. 28% Saving is for the Rinnai INFINITY® gas water heater EF250, EFi250, and EF24 models running on LPG.
6. 61% Saving is for the Rinnai INFINITY® gas water heater HD250, HD200, and HDi200 models running on Natural Gas.
7. 17% Saving is for the Rinnai INFINITY® gas water heater HD250, HD200, and HDi200 models running on LPG.
Suitable for
• Commercial and domestic external applications
• Applications requiring higher hot water temperatures, can be set up to 95 °C
• Mains and low pressure systems
• Solar installations as a gas boost
Hard or acidic water will need to be treated in order to use this product.
Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.
The following diagram has been provided to assist you in determining where (and if) an external continuous flow water heater can be positioned. If in doubt, prior to purchase, consult a licensed gasfitter.
|
| Downloads | |
 |
Spares |
|
Operations Guide |
|
Manifolding |
|
Installation Guide |
|
Servicing Schedule |
