Portable Convector Avenger 6.2 kW
Model: RCE671TRWHL
2.4-6.2 kW portable heater suitable for domestic and commerical heating applications. Can heat up to 95m² (depending on location in NZ). Cannot be installed in rooms smaller than 62.5 m³.
Portable, powerful and energy efficient
- Energy-efficiency: Outputting 90% of energy used
- Outstandingly effective: Using a new, very powerful, low-emission ceramic burner
- Portable and powerful: These heaters reach the set temperature of the room up to 41% quicker than reverse cycle air conditioning units*
FEATURES
Remote control
For the convenience of operating the heater between standby or on, as well as adjusting the temperature up or down.
Preheat
This function will automatically operate the appliance before the programmed start time so the room will be preheated to the set temperature when the timer comes on.
Dual timers
Allows you to program the appliance to come on for two separate periods each day, one period in the morning and one period in the evening.
Child friendly
No exposed flame, cool to touch cabinet**, and child lock as standard.
* Reference Vipac Report 870127_TST_003526 ** Louvre component of the heater will still be hot
Please note: Room sizing is important. This heater modulates to a low setting, and does not turn off. It is important that the room is of sufficient size that it will not overheat when the heater is on low—please refer to the ‘Suitable for’ tab for more information.
| Input: | 8.5-25 MJ/h |
| Output: | 2.4-6.2 kW |
| Efficiency: | 100% |
| Energy Star Rating: | 5.8 stars |
| Burner | Ceramic surface combustion burner |
| Data Plate | Lower right hand panel |
| Fan Type | Multi speed fan |
| Gas Control | Electronic control with thermostat |
| Gas Connection | Flexible gas hose with bayonet connection |
| Ignition System | Continuous spark electronic ignition |
| Noise Level | 41 dB(A) |
| Power Consumption |
16.5-27.5 W, standby < 0.8 W Power cord located lower right hand side of rear panel |
| Safety Devices | Overheat switch, electric fuse, flame failure sensor, oxygen depletion sensor, tilt switch, and power failure |
| Weight | 12 kg |
| Market Release | 2007 |
Domestic and commercial heating appliance, suitable for open plan areas. Can heat up to 95 m² (depending on geographical location).
This heater must not be installed in a room smaller than 62.5 m³ .
This is an unflued appliance and is not suitable for; bedrooms, bathrooms, oilets, saunas, or spa rooms.
Gas type
Available for Natural Gas or LPG. Specify gas type at time of purchase.
Appliance cannot be converted.
General clearances
