INFINITY® VT24 External Continuous Flow Gas Hot Water System

POA

Available Options


* Gas Type:

Qty:  Enquire
   - OR -   

Model: INFVT24

Rinnai Infinity VT24 External

 

The Rinnai Infinity™ VT is a continuous flow gas hot water system for external domestic applications. This type of hot water system produces endless hot water, and is a energy efficient water heating system, because it's only on when you need water.

The all-new Rinnai Infinity VT range delivers:

 

  • more speed - The Rinnai Infinity VT responds to changes in flow requirements faster than before.
  • more efficiency - The Rinnai Infinity VT saves on energy use by being able to more precisely match energy input, at low flow rates, to heat water to the required level.
  • more responsibility - The Rinnai Infinity VT has an improved minimum start-up flow rate, saving on water, and ensuring your Infinity is future proofed for water efficient tapware.
     

     

    Energy cost saving references 

    1.  The calculations are based on independent energy consumption data from AS 4232 and heat loss data derived from the BRANZ HEEP program. Comparative electric cylinder was 180 L in capacity.

    2.  60% Saving is for the Rinnai INFINITY® gas water heater VT models running on Natural Gas. Rinnai Rinnai INFINITY® gas water heater VT models manufactured after July 2011.

    3.  15% Saving is for the Rinnai INFINITY® gas water heater VT models running on LPG. Rinnai Rinnai INFINITY® gas water heater VT models manufactured after July 2011.

    4.  66% Saving is for the Rinnai INFINITY® gas water heater EF250, EFi250, and EF24 models running on Natural Gas.

    5.  28% Saving is for the Rinnai INFINITY® gas water heater EF250, EFi250, and EF24 models running on LPG.

    6.  61% Saving is for the Rinnai INFINITY® gas water heater HD250, HD200, and HDi200 models running on Natural Gas.

    7.  17% Saving is for the Rinnai INFINITY® gas water heater HD250, HD200, and HDi200 models running on LPG.

 

The all-new Rinnai Infinity VT range delivers:

More Speed
The Rinnai Infinity VT responds to changes in flow requirements faster than before.

More Efficiency
The Rinnai Infinity VT saves on energy use by being able to more precisely match energy input, at low flow rates, to heat water to the required level.

More Responsibility
The Rinnai Infinity VT has an improved minimum start-up flow rate, saving on water, and ensuring your Infinity is future proofed for water efficient tapware.

 




Energy cost saving reference footnotes 23.
 

DIMENSIONS:

product large image

A Width 350 mm
B Depth 194 mm
C Height - unit 530 mm
D Height including brackets 571 mm
E Hot water outlet (from wall) 87 mm
F Hot water outlet (from centre) 105 mm
G Cold water inlet (from wall) 68 mm
H Cold water inlet (from centre) 10 mm
I Gas connection (from wall) 77 mm
J Gas connection (from centre) 83 mm
K Condensate outlet (from wall)
L Condensate outlet (from centre)
M Gas: Length gas connection (from base)
Cold: Length of cold water inlet (from base)
Hot: Length of hot water outlet (from base)
40 mm
50 mm
39 mm
 

 

Suitable for:
• external domestic applications
• low simultaneous hot water demand applications (homes with 1-2 bathrooms).
• mains and low pressure systems
• solar installations as a gas boost

Hard or acidic water will need to be treated to use this product.

Gas type
NG or LPG

General clearances
The following diagram has been provided to assist you in determining where (and if) an external continuous flow water heater can be positioned. If in doubt, prior to purchase, consult a licensed gasfitter.

 

REU Number: REU-VR2426WG
Colour: White
Input: 188 or 52 kW
Output: 42 kW
Efficiency: 80%
Energy Star Rating: 5.0 stars
Factory Preset Temperature: 55 °C

 

Capacity Hot water capacity: 1.8-24 litres 
Nominal water capacity: 24 litres per minute at a 25 °C rise (1440 L/h)
Connections Hot water outlet: R¾ (20 mm)
Cold water inlet: R¾ (20 mm)
Gas supply: R¾ (20 mm)
Exhaust System Forced flue
Ignition System Direct electronic ignition
Injector Size NG: 1.0, 1.55
LPG: 0.7, 1.05
Line Pressure (min.) NG: 1.13 kPa, LPG: 2.75 kPa
Line Pressure (max.)

3.5 kPa (maximum standing pressure under abnormal intermittent conditions is 5.0 kPa).

In the case of commercial metering (i.e. 35-37 kPa coming in), there may be a requirement to regulate the incoming line pressure down.

Power Consumption Normal: 47 W (NG), 53 W (LPG), Standby: 2 W, Automatic Frost Protection: 74 W
Pressure Relief Valve opens at 2060 kPa, valve closes at 1470 kPa
Noise Level 48 dB(A)
NOx af Less than 60 ppm
Safety Devices Flame failure, boil-dry protection, fusible link, pressure relief valve and combustion fan rpm check
Water Supply Nominal operating pressure: 180-1000 kPa
Activation flow rate: 2.4 litres per minute
Weight 17 kg
Compliance ESS: Supplier Declaration of Compliance
• Declaration Number: 971220094
• Certificate Number: 6930
Market Release
 

 

Downloads
Installation Guide
Operations Guide
Spares

Plumbing Plus © 2019